

Heat exchange plate material: pure aluminum foil, hydrophilic coating aluminum foil, epoxy resin coated aluminum foil, stainless steel foil and so on the application of different environmental requirements
Heat exchange plate thickness: 0.1mm~0.2mm
Frame material: galvanized plate, aluminum zinc coated plate, aluminum, stainless steel, paint and so on for disposal of different coating request
Applicable places: suitable for less than 500 degrees Celsius heat air condition request, for example, paint room, drying industry, cabinet, base station, room etc.
Detailed description
Product introduction:
1, ERD series of heat exchange core body with counterflow heat exchange core body熱交換余熱回收芯體, two shares were interspersed with air and the relative reverse reverse access channel, can achieve high efficiency of heat transfer of heat exchange request, single core exchange efficiency can be completed 60%~80%, energy recovery used in civil, commercial and industrial ventilation system;
2, according to the request of the user environment using different materials for heat, heat transfer plate surface to do a spiral corrugated sheet metal forming processing, greatly increasing the heat transfer area, and promote the heat transfer of the heat exchange core body;
3, according to the user different air volume request, the condition request to provide the adjustable size and the size of the piece of space, so as to maximize the efficiency and pressure drop of heat exchange core and so on;
4, the air passage by stamping convex circular support, ensure high strength and tightness of the channel, to accept the new exhaust ability, before the lead heat transfer plate and permanent deformation, the maximum pressure heat exchange core for 800Pa;
5, entrance and exit edge edge adopts five layers of corrugated edge and bite edge technology, high strength, reliable sealing, all joints are used sealant, undercut the flow of plastic disposal, ensure the tightness of heat exchange core body, in the pressure less than 500Pa, the maximum leakage rate of 5 per thousand.
Specification size:
Product selection as far as possible in the economic operation of wind speed range (1m/s~2.5m/s), can achieve good effect of economic operation; the heat exchange core section size, stacking height, sheet spacing can be based on the needs of arbitrary size to provide stop spending, also according to the customer request edge angle, the case, please contact customer service.